<?xml version="1.0" encoding="UTF-8"?>
<metadata>
	<idinfo>
		<citation>
			<citeinfo>
				<origin>Digital Aerial Solutions, LLC</origin>
				<pubdate>Unpublished Material</pubdate>
				<title>Controls, IA_SouthCentral_2020_D20</title>
				<geoform>vector digital data</geoform>
				<pubinfo>
					<pubplace>None Available</pubplace>
					<publish>None Available</publish>
				</pubinfo>
			</citeinfo>
		</citation>
		<descript>
			<abstract>The Project data set consists of the Controls. The Geographical Extent of this data set extends to the entirety of the IA_SouthCentral_2020_D20_QL2 UTM Zone 15N boundary, approximately 10,238 square miles of the AOIs.</abstract>
			<purpose>The USGS/NRCS/IDALS contracted Digital Aerial Solutions, LLC to obtain professional services related to the planning, acquisition and development of Light Detection and Ranging (Lidar) data and derivative products. The task order is for a QL2 LiDAR survey to be collected over Adair, Appanoose, Clarke, Davis, Decatur, Iowa, Jefferson, Keokuk, Lucas, Madison, Mahaska, Marion, Monroe, Poweshiek, Ringgold, Union, Van Buren, Wapello, Warren and Wayne counties in Iowa. The deliverable products would be used by the USGS/NRCS/IDALS for conservation planning, design, research, floodplain mapping, wetlands identification, dam safety assessments, hydrologic modeling, and other environmental purposes.</purpose>
		</descript>
		<timeperd>
			<timeinfo>
				<sngdate>
					<caldate>20200330</caldate>
				</sngdate>
			</timeinfo>
			<current>ground condition</current>
		</timeperd>
		<status>
			<progress>Complete</progress>
			<update>As needed</update>
		</status>
		<spdom>
			<bounding>
				<westbc>-94.735009</westbc>
				<eastbc>-91.686570</eastbc>
				<northbc>41.875921</northbc>
				<southbc>40.557255</southbc>
			</bounding>
			<lboundng>
				<leftbc>356000.000000</leftbc>
				<rightbc>609000.000000</rightbc>
				<topbc>4636000.000000</topbc>
				<bottombc>4491000.000000</bottombc>
			</lboundng>
		</spdom>
		<keywords>
			<theme>
				<themekt>None</themekt>
				<themekey>Elevation Data</themekey>
				<themekey>Lidar</themekey>
				<themekey>Control</themekey>
			</theme>
			<place>
				<placekt>None</placekt>
				<placekey>Adair</placekey>
				<placekey>Appanoose</placekey>
				<placekey>Clarke</placekey>
				<placekey>Davis</placekey>
				<placekey>Decatur</placekey>
				<placekey>Iowa</placekey>
				<placekey>Jefferson</placekey>
				<placekey>Keokuk</placekey>
				<placekey>Lucas</placekey>
				<placekey>Madison</placekey>
				<placekey>Mahaska</placekey>
				<placekey>Marion</placekey>
				<placekey>Monroe</placekey>
				<placekey>Poweshiek</placekey>
				<placekey>Ringgold</placekey>
				<placekey>Union</placekey>
				<placekey>Van Buren</placekey>
				<placekey>Wapello</placekey>
				<placekey>Warren</placekey>
				<placekey>Wayne</placekey>
				<placekey>IA</placekey>
			</place>
		</keywords>
		<accconst>No restrictions apply to this data the data represented is the result of data collection and processing per contract specifications and indicates the general existing conditions at the time of the data collection. As such, it is only valid for its intended use, content, time, and accuracy specifications. The user is responsible for the results of any application of the data for other than its intended purpose.</accconst>
		<useconst>None. However, users should be aware that temporal changes may have occurred since this data set was collected and that some parts of these data may no longer represent actual surface conditions. Users should not use these data for critical applications without a full awareness of the limitations of the data. Acknowledgment of the US Geological Survey would be appreciated for products derived from these data.The data represented is the result of data collection and processing per contract specifications and indicates the general existing conditions at the time of the data collection. As such, it is only valid for its intended use, content, time, and accuracy specifications. The user is responsible for the results of any application of the data for other than its intended purpose.</useconst>
		<native>Inertial Explorer ver: 8.9;GeoCue Ver: 2014.1.21.4; Microstation V8i; Terresolid ver: 2015; LP360 ver: 2014.1.51.1; Arcmap ver: 10.4; Global Mapper ver: 16</native>
	</idinfo>
	<dataqual>
		<logic>Controls covers the entire 10,238 square mile Area of Interest intended for this project task.</logic>
		<complete>Ground Control points were collected to cover the entire project area and are distributed evenly across the project AOI, in accordance with ASPRS base specs for Ground Control points. Control point locations are essentially bare-earth ground points in open terrain with no overhead obstructions . All points are reviewed to ensure that they meet required standards.</complete>
		<posacc>
			<horizpa>
				<horizpar>Measurement precision, accuracy and reliability are dependent upon various factors including number of satellites, geometry, obstructions, observation time, ephemeris accuracy, ionospheric conditions, multipath etc. Figures quoted assume normal to favorable conditions.</horizpar>
				<qhorizpa>
					<horizpav>0.008</horizpav>
					<horizpae>The Control where collect with a Leica GS15 which has a stated Horizontal Accuracy withing a Network RTK of 8mm + 0.5 ppm (rms).</horizpae>
				</qhorizpa>
			</horizpa>
			<vertacc>
				<vertaccr>Measurement precision, accuracy and reliability are dependent upon various factors including number of satellites, geometry, obstructions, observation time, ephemeris accuracy, ionospheric conditions, multipath etc. Figures quoted assume normal to favorable conditions.</vertaccr>
				<qvertpa>
					<vertaccv>0.015</vertaccv>
					<vertacce>The Control where collect with a Leica GS15 which has a stated Vertical Accuracy withing a Network RTK of 15mm + 0.5 ppm (rms).</vertacce>
				</qvertpa>
			</vertacc>
		</posacc>
		<lineage>
			<procstep>
				<procdesc>An ESRI shapefile was created using ArcMap 10.4 to delineate the Sixty-Three (63) Ground Control points collected and used to Calculate the accuracy of the adjusted LiDARs absolute postion.</procdesc>
				<procdate>20200522</procdate>
			</procstep>
		</lineage>
	</dataqual>
	<spdoinfo>
		<direct>Point</direct>
		<ptvctinf>
			<sdtsterm>
				<sdtstype>Area Point</sdtstype>
				<ptvctcnt>63</ptvctcnt>
			</sdtsterm>
		</ptvctinf>
	</spdoinfo>
	<spref>
		<horizsys>
			<planar>
				<gridsys>
					<gridsysn>Universal Transverse Mercator</gridsysn>
					<utm>
						<utmzone>15N</utmzone>
						<transmer>
							<sfctrmer>0.99960000</sfctrmer>
							<longcm>-93.00000000</longcm>
							<latprjo>0.000000000</latprjo>
							<feast>500000.000000000</feast>
							<fnorth>0.000000000</fnorth>
						</transmer>
					</utm>
				</gridsys>
				<planci>
					<plance>Coordinate Pair</plance>
					<coordrep>
						<absres>0.001</absres>
						<ordres>0.001</ordres>
					</coordrep>
					<plandu>meters</plandu>
				</planci>
			</planar>
			<geodetic>
				<horizdn>NAD83, National Reference System 2011</horizdn>
				<ellips>Geodetic Reference System 80</ellips>
				<semiaxis>6378137.000000</semiaxis>
				<denflat>298.255822101</denflat>
			</geodetic>
		</horizsys>
		<vertdef>
			<altsys>
				<altdatum>North American Vertical Datum of 1988 (Geoid18)</altdatum>
				<altres>0.001</altres>
				<altunits>meters</altunits>
				<altenc>Explicit elevation coordinate included with horizontal coordinates</altenc>
			</altsys>
		</vertdef>
	</spref>
	<eainfo>
		<overview>
			<eaover>None</eaover>
			<eadetcit>None</eadetcit>
		</overview>
	</eainfo>
	<distinfo>
		<distrib>
			<cntinfo>
				<cntorgp>
					<cntorg>None</cntorg>
					<cntper>None</cntper>
				</cntorgp>
				<cntpos>None</cntpos>
				<cntaddr>
					<addrtype>None</addrtype>
					<address>None</address>
					<city>None</city>
					<state>None</state>
					<postal>None</postal>
					<country>None</country>
				</cntaddr>
				<cntvoice>None</cntvoice>
				<cntfax>None</cntfax>
				<cntemail>None</cntemail>
				<hours>None</hours>
				<cntinst>None</cntinst>
			</cntinfo>
		</distrib>
		<resdesc>None</resdesc>
		<distliab>None</distliab>
	</distinfo>
	<metainfo>
		<metd>20210930</metd>
		<metc>
			<cntinfo>
				<cntorgp>
					<cntorg>Digital Aerial Solutions, LLC</cntorg>
					<cntper>Josh Helton</cntper>
				</cntorgp>
				<cntpos>VP/Assistant General Manager</cntpos>
				<cntaddr>
					<addrtype>mailing and physical address</addrtype>
					<address>4027-A Crescent Park Drive</address>
					<city>Riverview</city>
					<state>FL</state>
					<postal>3321078</postal>
					<country>United States</country>
				</cntaddr>
				<cntvoice>813-628-0788</cntvoice>
				<cntfax>813-628-0777</cntfax>
				<cntemail>jhelton@digitalaerial.com</cntemail>
				<hours>Monday through Friday 8:00 AM to 4:00 PM (Eastern Time)</hours>
				<cntinst>If unable to reach the contact by telephone, please send an email. You should get a response within 24 hours.</cntinst>
			</cntinfo>
		</metc>
		<metstdn>FGDC Content Standards for Digital Geospatial Metadata</metstdn>
		<metstdv>FGDC-STD-001-1998</metstdv>
		<metac>None</metac>
		<metuc>None</metuc>
		<metsi>
			<metscs>None</metscs>
			<metsc>Unclassified</metsc>
			<metshd>None</metshd>
		</metsi>
		<metextns>
			<onlink>None</onlink>
			<metprof>None</metprof>
		</metextns>
	</metainfo>
</metadata>