Spicer Group Inc.2018Vecter digital dataGeographic Extent: Saginaw County, MI, covering approximately 815 square miles. Dataset Description: Saginaw County, MI 2016 LiDAR project called for the Planning, Acquisition, processing and derivative products of LIDAR data to be collected at a nominal pulse spacing (NPS) of 0.7 meter. Project specifications are based on the U.S. Geological Survey National Geospatial Program Base LIDAR Specification, Version 1.0. The data was developed based on a horizontal projection/datum of Michigan State Plane South, NAD83, international feet and vertical datum of NAVD1988 (GEOID12A), international feet. LiDAR data was delivered in RAW flight line swath format, then processed to create Classified LAS 1.2 Files formatted to 991 individual 5000 foot X 5000 foot tiles. Corresponding Intensity Images and Bare Earth DEMs tiles were created with the same 5000 foot X 5000 foot tile schema. Breaklines were produced in Esri geodatabase format. Ground Conditions: LiDAR was collected in spring of 2015, while no snow was on the ground and rivers were at or below normal levels. In order to post process the LiDAR data to meet task order specifications, Spicer Group Inc established a total of 120 Land Cover control points (52 QC checkpoints, 68 calibration control points) which were used to calibrate the LIDAR to known ground locations established throughout the Saginaw County, MI project area. 28 additional check points were surveyed by Kucera for the accuracy check of the initial acquisition. these 28 points have been added to the NVA LiDAR and DEM accuracy reports.To acquire detailed surface elevation data for use in conservation planning, design, research, floodplain mapping, dam safety assessments and elevation modeling, etc. Classified LAS files are used to show the manually reviewed bare earth surface. This allows the user to create Intensity Images, Breaklines and Raster DEM. The purpose of these lidar data was to produce high accuracy 3D hydro-flattened Digital Elevation Model (DEM) with a 2 foot cell size. These raw lidar point cloud data were used to create classified lidar LAS files, intensity images, 3D breaklines, and hydro-flattened DEMs as necessary.CONTRACTOR: Spicer Group Inc Lidar data were acquired by Kucera International Inc. All follow-on processing was completed by the prime contractor.2015032420150417ground conditionCompleteNone planned-84.3995620600000-83.667611750000043.571665060000043.116841880000013114641.52113310000.000755000.000590000.000NoneElevation dataLidarBreaklinesNoneMichiganMISaginaw CountyNo restrictions apply to this data.None. However, users should be aware that temporal changes may have occurred since this dataset was collected and that some parts of these data may no longer represent actual surface conditions. Users should not use these data for critical applications without a full awareness of its limitations. Acknowledgement of the U.S. Geological Survey would be appreciated for products derived from these data.Spicer Group IncNathan Shepherdmailing and physical

6600 Peachtree Dunwoody Road, Building 400, Suite 108

AtlantaGA30328USA678-585-6501 ex304678-585-6501nathans@spicergroup.comMonday through Friday 8:00 AM to 5:00 PM (Eastern Time)If unable to reach the contact by telephone, please send an email. You should get a response within 24 hours.MicroStation Version 8; TerraScan Version 16; TerraModeler Version 16; GeoCue Version 2014.1.21.1; ESRI ArcGIS 10.3; Windows 7 Operating System;Global Mapper V.17.1 \\Proj2015\122278SG2015 - Saginaw County LiDAR 1.66 TBData covers the entire area specified for this project. Breaklines were collected in all inland ponds and lakes ~2 acres or greater. These features were flat and level water bodies at a single elevation for each vertex along the bank. The entire water surface edge is at or below the immediate surrounding terrain. Breaklines were collected for all streams and rivers ~100' nominal width or wider. These features are flat and level bank to bank, gradient will follow the surrounding terrain and the water surface will be at or below the surrounding terrain. Streams/river channels will break at culvert locations however not at elevated bridge locationsAll files are inspected to ensure that they conform to the specified file naming conventions, all files load in their correct geographic position, all files conform to the project specifications for file standard and content Spicer Group Inc.2018vector digital dataSaginaw, MISpicer Group Inc.External Hard Drive2015032420150417ground conditionMI_SaginawCo_2015_LiDAR_breaklinesThis data source was used (along with the bare earth lidar) to aid in the generation of raster DEM'sSpicer Group Inc.2018vector dataSaginaw, MISpicer Group IncClassified LiDAR2015040420150417ground conditionMI_SaginawtCo_breaklinesThis data source along with bare earth LiDAR was used to generate DEM's.Hydro Flattening Breakline Processing: Class 2 LiDAR was used to create a bare earth surface model. The surface model was then used to heads-up digitize 2D breaklines of inland streams and rivers with a 100 foot nominal width and Inland Ponds and Lakes of 2 acres or greater surface area. Elevation values were assigned to all Inland Ponds and Lakes, Inland Pond and Lake Islands, Inland Stream and River Islands, using TerraModeler functionality. Elevation values were assigned to all Inland streams and rivers using ESRI Software. All ground (ASPRS Class 2) LiDAR data inside of the collected inland breaklines were then classified to water (ASPRS Class 9) using TerraScan macro functionality. The breakline files were then translated to ESRI File-Geodatabase format using ESRI conversion tools.MI_SaginawCo_2015_LiDAR_ctrlMI_SaginawCo_2015_LiDAR2018Hydro Flattened BreaklinesSpicer Group IncNathan Shepherdmailing and physical

6600 Peachtree Dunwoody Road, building 400, Suite 108

AtlantaGA30328USA678-585-6501 ex304678-585-6501nathans@spicergroup.comMonday through Friday 8:00 AM to 5:00 PM (Eastern Time)If unable to reach the contact by telephone, please send an email. You should get a response within 24 hours.VectorVectorState Plane Coordinate System 1983211342.143.66666666666666-84.3666666666666641.513123359.580052490.0coordinate pair0.010.01international feetNorth American Datum of 1983Geodetic Reference System 806378137298.257222101North American Vertical Datum of 19880.01international feetExplicit elevation coordinate included with horizontal coordinatesBreaklinesA line in a surface that represents a distinct interruption in the slope of a surface, such as a ridge, road, or stream.Esri GIS Dictionary http://support.esri.com/en/knowledgebase/GISDictionary/term/breaklineFIDInternal feature number.EsriSequential unique whole numbers that are automatically generated.OBJECTIDInternal feature number.EsriSequential unique whole numbers that are automatically generated.ShapeFeature geometry.EsriFeature geometry - PolylineZMLayerCorresponding Microstation LayerEsriFeature geometry - PolylineZMRefName_1Tile NumberEsriFeature geometry - PolylineZM20181223Spicer Group IncNathan Shepherdmailing and physical

6600 Peachtree Dunwoody Road, building 400, Suite 108

AtlantaGA30328USA678-585-6501 ex304678-585-6501nathans@spicergroup.comMonday through Friday 8:00 AM to 5:00 PM (Eastern Time)If unable to reach the contact by telephone, please send an email. You should get a response within 24 hours.FGDC Content Standard for Digital Geospatial MetadataFGDC-STD-001-1998None.None.None.UnclassifiedNONE